STAKKAbox™ Modula
The STAKKAbox™ Modula range of network access chamber systems provides a lightweight, structural solution for use within multiple sector applications. The Modula chamber system has been designed to significantly reduce the costs of network access chamber installations through time savings. Due to their twinwall design, individual sections are lightweight, meaning they can be manually lifted and stacked on top of each other to reach the specified depth. The Modula chamber system also comes with a wide range of X-TRAS™ chamber accessories and AX-S™ access covers to provide a complete network access system.
Features & Benefits
Fast and Easy to Install
STAKKAbox™ chambers are significantly faster to install than conventional alternatives, with complete installations typically taking up to one hour. This results in reduced costs for the installer. No specialist equipment or plant is required in order to install the chamber and there is no need for specialist box builders.
Sectional & Twin Wall Design
Chambers are built to required depth by adding 150mm sections. Due to the twinwall design, individual sections are light meaning they can be manually lifted. Each access chamber possesses vertical and horizontal ribs, resulting in a product that is strong vertically and on the sidewall. Most installations do not require specialist backfills, reducing installation costs.
Flexible During Installation
Chambers can be adapted to suit on-site conditions with standard tools to overbuild over existing networks, Introduce duct entries for cable entry and for top-section fine adjustment.
Smooth Outer Walls with Lip to ‘Key In’
Gaps in the outer wall will negatively impact the effectiveness of compaction around the chamber. STAKKAbox™ chambers have smooth outer walls and an outer lip which keys into the backfill.
Manufactured from Recycled Material
Specifying STAKKAbox™ Modula helps end users reach sustainability targets due to the material being largely composed of high-grade recycled material. In addition, Modula is completely recyclable at the end of its life.
Variability in Size
STAKKAbox™ Modula can be used to create a large number of sizes due to its component design. This provides access chambers with clear opening from 150 x 150 up to 900 x 900.
Lightweight
Due to the sectional, twinwall design all Modula 150mm sections are under 11kg in weight, making it suitable for single operative lift under manual handling regulations.
Material
STAKKAbox™ Modula from Polypropylene (PP) which possesses excellent strength to weight properties.
How it's Built
STAKKAbox™ Modula chambers are formed by combining and interlocking ring sections that are stacked one on top of the other to reach the specified depth required on-site. The Modula range then allows installers to simply place and connect up tubes or ducts, backfill, and walk away.
Pre-drilled for Ease of Connection
Easily knocked-out duct caps on all four sides of each Modula ring section allow for quick installation at different depths, removing the need for power tools and de-skilling the installation for the contractor.
Materials
The STAKKAbox™ Modula chamber system is moulded from Polypropylene (PP) which possesses excellent strength to weight properties.
Extensively tested to ensure that it meets loading requirements up to B125 in a variety of installation environments.
Available Sizes
STAKKAbox™ Modula has a range of standard sizes. These provide access chambers with clear openings from 150 x 150 up to 900 x 900 and are built by stacking 150mm deep ring sections, which are then stacked on top of each other to reach the specified depth required.
Download our product size guide for chambers for more details on available sizes.
Load Rating
STAKKAbox™ Modula has been extensively tested to ensure that it meets the loading requirements up to B125 in a variety of installation environments.
The loadings match the vertical loading categories recognized by EN124 gully tops and access tops for vehicular and pedestrian users.
Accessories
STAKKAbox™ Modula can be supplied with the following accessories:
Base Sections
We extrude 100% recycled Low Density Polyethylene chamber bases to suit any chamber size. These are securely fitted to the bottom ring section of a chamber to provide a clean easy finish to the floor of the chamber.
X-TRAS™ Range
Using Cubis access chamber systems accessories can help save even more time. Our chamber options & accessories range allows installers to simply place, connect up tubes or ducts, backfill and walk away.
AX-S™ Covers
The Cubis AX-S™ range of access covers provide customers with a complete underground network access system as they are designed and manufactured from a range of materials to complement our chamber ranges.
