Skip To Content
Call:
Get a Quote

Pit Accessories

Using a CUBIS Systems cable pit system can save even more time with our Options and Accessories range, allowing installers to simply place, connect up ducts, backfill and walk away.

CUBIS Systems X-TRAS™ range consists of a series of component parts each corresponding to a specified product within CUBIS’ range. Available pre-fitted or as an add-on, the X-TRAS™ range has been designed to improve the performance of products, enhance the existing system, reduce build time and ensure safety with each accessory unique to specific network operator requirements.

 

Bellmouth 

  • Provides the cut end of duct with a smooth finish
  • Prevents the duct from pushing into the pit and restricting access 
  • Manufactured in Polypropylene
  • Available in a variety of colours and sizes

Current sizes (to fit 117 mm hole): 54 mm, 96 mm, 110mm

Duct Caps 

  • Temporary cap for factory-made duct entries
  • Manufactured in Polpropylene

Current sizes (to fit hole): 54 mm, 63 mm, 96 mm, 110 mm, 125 mm

 

Sand Block

  • Bellmouth (as per far left) fitted with foam to allow for smaller ducts or cables to enter the chamber
  • Sealed against sand and backfill ingress
  • MULTIduct™ spigots can be built into assembled cable pits so that interface can be completed quicker on site. 
  • These can be located anywhere to match customers’ needs.

Cable bracket and bearer 

  • Manufactured from galvanised steel
  • Mounted to the pit wall using bolts (supplied with system)
  • Wall bearer allows for multiple cable bearers to be installed and flexibility in vertical position to suit cable
  • Cables can be securely strapped to the cable bearer
Wall bearer types
Reference No. holes Length
WB Type 1 1 178 mm
WB Type 2 2 278 mm
WB Type 3 3 508 mm
WB Type 5 5 813 mm
WB Type 8 8 1270 mm
WB Type 10 10 1575 mm
WB Type 12 12 1880 mm
Cable Bearer types
Reference Length
 CB Type 3 115 mm
CB Type 5  165 mm
CB Type 8  242 mm
CB Type 12  343 mm
CB Type 18  495 mm
CB Type 24  648 mm
  • Allows cable to be looped around the hook to keep it off the floor of the pit
  • Manufactured in Polypropylene
  • Comprised of wall mounted plaque (fitted with self-tapping screw) and separate hook which slots on to the plaque
  • Internal space is 65 mm x 140 mm, suitable for at least 50 m of fibre cable
  • System provides steps and removable hand rail to help with safe access 
  • Handrail locates inside in the chamber when in the closed position
  • Mounts to the pit wall
  • Manufactured in galvanised steel
  • Designed to be used on the France Telecom network
  • Aid with pulling of cables between pits
  • Manufactured in galvanised steel
  • Mounts to the pit wall using supplied bolts

Also available

  • Anchor irons for cable pulling that can be cast into a concrete base
  • Mounts to the pit wall (using bolts and backing plate supplied) to provide stepped access to the pit
  • Manufactured in galvanised steel
  • System provides steps and removable hand rail to help with safe access 
  • Handrail locates inside in the pit when in the closed position
  • Mounts to the pit wall
  • Manufactured in galvanised steel
  • Designed to be used on the France Telecom network