Skip To Content
Call:
Get a Quote

AX-S™ Composite

Composite cover
Composite cover
IMG 6278.JPG

AX-S™ Composite covers offer a lightweight cover with no reduction in loading performance. A wide range of sizes can be manufactured utilising multi-cover frames and there are options for bespoke customer badging.

Covers can also be fitted with locking features to enhance the security of the assets below.

AX-S™ Composite covers are tested to meet the loading requirements of A15, B125 and C250 under EN124.

AX-S Composite Enquiry Form

* indicates a required field

Enter your enquiry details
  • Lightweight covers
    Composite access covers weigh less than 30kg, allowing the covers to be easily removed.
  • No inherent scrap value
    Covers are not attractive to thieves. Stolen covers mean costs of replacement and of guarding open access chambers.
  • Can be fitted with locking
    AX-S™ Composite access covers are fitted with bolt-down locking which can be specified to the end user’s requirements. This prevents access to the infrastructure network below.
  • Long life
    Composite access covers have long service life when installed, providing lower total life costs for the end user.
  • Anti-slip design
    The tread pattern on the cover is non-slip, exceeding a Slip Resistance Value (SRV) of 80.
  • Permeable to radio waves
    Composite access covers do not block radio waves, allowing telemetry readings to be taken without removing the access cover.
  • Badged with customer information
    Covers can be badged with  information to allow for identification by operatives.
  • Bespoke sizes
    Can be manufactured in a large size range, using cross-beams and cross-pieces to build multi-cover units.

Vertical Loading 

AX-S™ Composite covers meet the vertical load classes of A15, B125 and C250 set by EN124. 

A15: Suitable for: pedestrians only areas

B125: Suitable for: footways, pedestrian areas and comparable areas, car parks or parking decks.

C250: Suitable for: kerbside channels

The frames, covers and cross pieces are manufactured from rolled steel section in compliance with BS1449 and galvanised in compliance with BS EN ISO 1461 .

Covers are manufactured from Glass Reinforced Polyester Resin (GRP).

'A' rated covers are manufactured from BMC (Bulk Moulding Compound). 'B' and 'C' rated covers are manufactured from SMC (Sheet Moulding Compound).

AX-S™ Composite covers  can be supplied with the following accessories.

Customer Badging

Bespoke customer details can be included in the badge for identification and awareness. This is subject to volume.

Frame Designs

Composite access covers can be supplied with a number of frame options, including:

  • Raising
  • BLOKadjust
  • High Top
  • Composite

For more information, please consult the cover frames page.

Security

Access covers can be fitted with bolt-down locking. Standard keys are available in flat head, penta head, offset circle and snake eye. 

 

Information on sizing

Access chambers are always referred to by their ‘clear opening’ (internal dimensions).

Access covers are always referred to by their clear opening and sometimes by their frame depth or type.

The access cover clear opening should be greater or equal to the clear opening of the access chamber to ensure it will be supported when installed.

Download our product size guide for more information on available sizes.

Related Products

Related Case Studies

IMG 4722.JPG Water Meter Chamber Installation: Parc du Mercantour, France

Roubion; a remote village situated high up in Alpes Maritimes in France has been subject to an exciting water chamber installation in which an oversiz

091 - Worcester CC - MULTIduct Crossing - UK - 013 (1).JPG Worchester City Council Under Road Crossing: MULTIduct™

Worcester City Council under-road crossing installation using MULTIduct™ cable trough, MODULA chamber and AX-S™ Composite cover.

108 - Manchester Metrolink - Airport Line, MULTIduct Linear Route - 019.JPG Light Rail Manchester Metrolink: MULTIduct™, ULTIMA, AX-S™ Covers

The installation of MULTIduct™, STAKKAbox™ ULTIMA & AX-S™ Covers for the Manchester Metrolink Light Rail.