Skip To Content
Call:
Get a Quote

MULTIduct™ 4, 6, 9 Way

FAMILY - Connection Side - Straight
FAMILY - Connection Side - Straight
MULTIduct (2)
MULTIduct (4)

MULTIduct™ is a multiple duct system, used for constructing under track or road crossings (UTX/URX), bridge crossings and linear routes.

Duct banks are built by connecting nominal 1 metre long sections, either by a steel clip or a push-fit system. There is also a range of accessories that offer flexibility in construction.

MULTIduct™ is manufactured from Nitrogen foamed-High Density Polyethylene, which offers high strength-to-weight properties, resulting in a product that has high crush resistance but can be lifted by a single person (all parts are below 25kg).

MULTIduct Enquiry Form

* indicates a required field

Enter your enquiry details
  • Strong
    MULTIduct™ has a high crush strength making it more robust with no breakages. The high strength enables it to be buried at a much shallower depth compared to conventional ducting. 
  • Environmental
    HDPE material consists of 70% recycled content and is completely recyclable at the end of its life. 
  • Light Weight
    All MULTIduct­™ parts are under 25 kg this makes them easier to handle, install on site, transport and reduces health and safety issues.  
  • Fast Installation
    Rapid installation for every application resulting in more work completed during track possessions or road closures.  
  • Flexible
    A full range of accessories to overcome bends, break out of runs and interface with standard ducting is available. MULTIduct™ can also be cut onsite for termination.   
  • Economical
    MULTduct™ can be installed with less excavation needed due to shallower burial, no special plat required for lifting and no concrete surround, specialist backfill or spacers required. 
  • Superior
    MULTIduct™ is manufactured to ISO 9001 and ISO 14001

 STAKKAbox™ Ultima is commonly used for the following applications:

Highways

  • Motorway Communications
  • Drainage

Rail

  • Telecommunications 
  • Drainage
  • Buried Cable Routes

Power & Energy

  • High Voltage power cable jointing
  • Low Voltage power cable link boxes

Telecommunications

  • Jointing chambers

 

MULTIduct™ is manufactured in nitrogen-foamed High Density Polyethylene, of which up to 70% is recycled material

Benefits of HDPE:

  • Excellent chemical resistance to ethanol, acetone, diesel etc.
  • Unaffected by sulfate ground conditions.
  • Recyclable
  • Robust - no breakage waste
  • Completely impervious to water
  • Nitrogen injection creates cellular core (CFC free)
  • High strength to weight ratio
  • High stiffness to weight ratio
  • Easy to cut for duct entries

MULTIduct™ Accessories

MULTIduct™ duct system can be fitted with the following accessories

 Single Duct Adapters 
Connects many single ducts from standard conduit sections. adapts to standard PVC duct.

 

 

Double Socket
Double bells to join male to male (spigot to spigot). Lay length 0.305 mm

 

 

Double Spigot
Double bells to join female to female (spigot to spigot). Lay length 0.305 mm

 

 

Socket End Cap
Used to terminate entry points and can be pre-fitted for simpler construction

 

 

 

Spigot End Cap
Used to terminate entry points and can be pre-fitted for simpler construction

 

 

 

Flexible Duct Bends
Allows flexible connection between conduit sections. Up to 90° bend

 

 

 

Breakout Adapters
Allows removal of one or more cable(s) from an individual bore in the 4, 6 or 8 way MULTIduct™

  • 4 Way (160 mm) 45 Degree Y-Lateral
  • 4 Way (160 mm) 22.5 Degree Y-Lateral

 

Installation of an MULTIduct™

For more product videos, please visit the Video section

Product Sizes: 

Product Ref: Lay Length (mm) X (mm) Y (mm) Ducting Space (mm)
4 Way 1065 252 252 110
4 Way XL 1065 376 376 160
6 Way 1065 376 252 110
9 Way 1065 376 376 110

Related Case Studies

091 - Worcester CC - MULTIduct Crossing - UK - 013 (1).JPG Worchester City Council Under Road Crossing: MULTIduct™

Worcester City Council under-road crossing installation using MULTIduct™ cable trough, MODULA chamber and AX-S™ Composite cover.