Direkt zum Inhalt
Call:
Bekommen

Zubehör für Kabelschächte

Wir bieten für unsere Kabelschächte umfangreiches Zubehör an wodurch der Einbau weiter vereinfacht werden kann. Dies gilt für das Kabelmanagement im Schacht, den Anschluß der Rohre sowie die Verfüllung des Schachtes.

Unsere Zubehörreihe ist teilweise speziell für die Anforderungen der Netzbetreiber entwickelt worden.

Die Zubehörteile können auf Wunsch von CUBIS vormontiert werden.

 

Bellmouth 

  • Provides the cut end of duct with a smooth finish
  • Prevents the duct from pushing into the chamber and restricting access 
  • Manufactured in Polypropylene
  • Available in a variety of colours and sizes

Current sizes (to fit 117 mm hole): 54 mm, 96 mm, 110mm

Duct Caps 

  • Temporary cap for factory-made duct entries
  • Manufactured in Polpropylene

Current sizes (to fit hole): 54 mm, 63 mm, 96 mm, 110 mm, 125 mm

 

Sand Block

  • Bellmouth (as per far left) fitted with foam to allow for smaller ducts or cables to enter the chamber
  • Sealed against sand and backfill ingress
  • MULTIduct™ spigots can be built into assembled chamber so that interface can be completed quicker on site. 
  • These can be located anywhere to match customers’ needs.

Cable bracket and bearer 

  • Manufactured from galvanised steel
  • Mounted to the chamber wall using bolts (supplied with system)
  • Wall bearer allows for multiple cable bearers to be installed and flexibility in vertical position to suit cable
  • Cables can be securely strapped to the cable bearer
Wall bearer types
Reference No. holes Length
WB Type 1 1 178 mm
WB Type 2 2 278 mm
WB Type 3 3 508 mm
WB Type 5 5 813 mm
WB Type 8 8 1270 mm
WB Type 10 10 1575 mm
WB Type 12 12 1880 mm
Cable Bearer types
Reference Length
 CB Type 3 115 mm
CB Type 5  165 mm
CB Type 8  242 mm
CB Type 12  343 mm
CB Type 18  495 mm
CB Type 24  648 mm
  • Allows cable to be looped around the hook to keep it off the floor of the chamber 
  • Manufactured in Polypropylene
  • Comprised of wall mounted plaque (fitted with self-tapping screw) and separate hook which slots on to the plaque
  • Internal space is 65 mm x 140 mm, suitable for at least 50 m of fibre cable
  • System provides steps and removable hand rail to help with safe access 
  • Handrail locates inside in the chamber when in the closed position
  • Mounts to the chamber wall
  • Manufactured in galvanised steel
  • Designed to be used on the France Telecom network
  • Aid with pulling of cables between chambers 
  • Manufactured in galvanised steel
  • Mounts to the chamber wall using supplied bolts

Also available

  • Anchor irons for cable pulling that can be cast into a concrete base
  • Mounts to the chamber wall (using bolts and backing plate supplied) to provide stepped access to the chamber 
  • Manufactured in galvanised steel
  • System provides steps and removable hand rail to help with safe access 
  • Handrail locates inside in the chamber when in the closed position
  • Mounts to the chamber wall
  • Manufactured in galvanised steel
  • Designed to be used on the France Telecom network